Phone(+65) 6284 3818 | sales@premier-sols.com | Enquriy |
Water Cold Sealing Flange with Valves & Vacuum Gauge for 100mm dia.Tube - EQ-FG-100WC
Description
- This is a pair of sealing flange with the water cooling jacket valve for OD 100- 102 mm ( 4" ) diameter processing tube. If you cannot use a ceramic block in two ends of the tube, you must use the water cooling jacket to keep the flange cool (otherwise silicone o-ring may get damaged)
SPECIFICATIONS
Features - Made of Stainless Steel with double high-temperature silicon O-rings on the flange.
- Stainless steel needle valve with 1/4" pipe adapter.
- The assembly kit will seal both ends of a 100-102 mm diameter ceramic and quartz tube.
- A vacuum gauge is installed on one side of the flange.
- Max. The furnace working temperature is 1150°C without thermal block if the tube furnace is installed with this water cold flange.
- You may choose the left side, the right side, and the full set of the flange at the product option bar
- Please always use a recirculating water chiller ( see related product below ) to save water.
- http://www.mtixtl.com/images/products/thumb/shuilengfalan.jpg" alt="" width="98" height="65" style="border: 0px;" title="Click to enlarge" />http://www.mtixtl.com/images/products/thumb/watercoolingpipedetailsfinal.2.jpg" alt="" width="94" height="68" style="border: 0px;" title="Click to enlarge" />http://www.mtixtl.com/images/products/thumb/watercoolingjacketyoubian111.3.jpg" alt="" width="95" height="63" style="border: 0px;" title="Click to enlarge" />
Vacuum level Options - Please click here to order digital vacuum gauge for precision vacuum control upto 10-4 torr
- For CVD application, please choose anti-corrosive vacuum gauge ( click pic below left 2 )
- You can choose the various end of fitting as options ( click here to order separately )
- You may click here order a flowmeter to control gas flowing
- You may order flange support to avoid tube turning ( picture below right)
Installation Video 
Dimension 
Warning - Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.
- Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.
- For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns.
-
Options Click here to choose flange for tube from 1" to 11" Vacuum Pump & High Vacuum Station 
Register for new product information: