Fluidized Bed Furnace w/ 2.4Mhz Ultrasonic Atomizer for Preparing Core-Shell Particles - OTF-1200X-S-FBUS

Name: Fluidized Bed Furnace w/ 2.4Mhz Ultrasonic Atomizer for Preparing Core-Shell Particles - OTF-1200X-S-FBUS
Brand: Premier Solutions Pte. Ltd

0.0/5 rating (0 votes)

Description

OTF-1200X-S-FBUS is a UL/CSA ready Fluidized Bed Vertical Furnace with an Ultrasonic atomizer for powder CVD ( FBCVD)applications. It consists a vertical positioned cylindrical heating chamber that surrounds the quartz tube with a built-in filter right in the lower middle section of the central heating zone. Its filter is a porous (15~40 microns) quartz frit that allows the controlled gas flow to pass through and float the particles on a cushion of the gas stream where the interaction between the solid and gaseous and liquid materials takes place. This is an ideal tool for core-shell structure nano-powder formation.

SPECIFICATIONS:

Fluidized Zone	Ultra-high frequency (2.4Mhz) ultrasonic atomizer can deliver sub-micron droplets to the heated flowed for the subsequent decomposition and CVD coating on powder. Provides uniform distribution of the gas and solution sub-micron particles blast over the entire cross-section of the tube chamber Solid particles are suspended by an upward gas flowing Excellent heat transfer and coating to every single suspended particle Processed materials can be discharged from the top side of the tube after the cap is been taken off Note: The gas is passed upward through the fluidized bed at a high enough velocity to lift the particles. However, particles may be swept away from the tube chamber entirely if the velocity was set too high. Depends on the particle size, you may want to adjust the gas in pressure and flow rate until particles are lifted and move turbulently inside of the tube.
	110VAC, 2.4 MHz ultra-high frequency Ultrasonic Generator can generate sub-micron solution particles Fluoropolymer coated liquid container and Fluoropolymer sealing gaskets external Fluoropolymer optical sensor and valve for keeping the liquid level to the correct height and preventing damage to the nebulizing element, should the unit run dry. Ultrasonic power programmable,0~100%, 5% increment. 304 Stainless Steel T-piece (1.5'' sanitary fitting) with 1/4'' tube fitting adapters enables the use of carrier gas.
Quartz Frit	Frits with forced convection design can trap the particles within the central heating area Frit: 15~40 microns porous, 22mm O.D x 4mm thick
Furnace Casing	Double layer steel structure with air cooling Split door design for easy installation of tube High purity Al2O3 fibrous insulation designed for maximum energy saving
Power	1200W
Voltage	AC 110V or 220V Single Phase, 50/60 Hz
Max. Temperature	1100oC
Continuous Temperature	1000oC
Max. Heating Rate	<= 20 oC /min
Tube Size and Materials	One quartz tube is included. Main tube with bottom frit and enlarged space for particles processing Two Ends: 25mm O.D, 22mm I.D; Central: 50mm O.D, 44mm I.D, for detailed size, please refer to the picture in below. Central enlarged area ensures the high aerodynamic performance
Sealing Flanges	Bottom flange: Regular designed 1'' bottom flange with 1/4'' tube fitting for introducing primary gas Top Flange: Special designed 1'' top flange with backstreaming secondary (precursor) gas inlet and exhaust, please click the picture in below for detail
Options	Das delivery may be needed for gas control Oxygen Monitoring: An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation. Please click the picture below to learn more:
Heating Zone Length	200mm (single zone)
Constant Heating Zone	100mm (+/-2oC)
Temperature Controller	30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built in PID Auto-Tune function with overheating & broken thermocouple protection. Over temperature protection and alarm allows for operation without attendant(s). +/- 1 ºC temperature accuracy.
Heating Elements	Fe-Cr-Al Alloy doped by Mo
Fitting Ports	1/4'' Tube Fittings were installed on both sides of the flange for standard connection to the gas supplier
Dimensions	340mm×300mm×1000mm ( W x L x H)
Net Weight	~20 Kg (excluding mobile cart)
Shipping Weight	200 lbs
Warranty	One-year limited warranty (Consumable parts such as heating elements, processing tubes and o-rings are not covered by the warranty, please order the replacement at related products below.)
Compliance	CE Certified The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. （ please click marks below to learn details )
Warning Click here to learn the installation of a gas regulator	Tube furnaces with quartz tube is designed for using under low positive pressure < 0.2 bars / 3 psi / 0.02 Mpa The flow rate for gasses should be limited to < 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
Operation Instructions