| Furnace Casing | |
Power | 1.5KW |
Voltage | AC 110V or 220V Single Phase, 50/60 Hz (Please select the voltage of the furnace in options bar) |
Max. Temperature | 1100oC ( standard)
Optional: : if you want to use the furnace upto 1200oC, we will add a thermal insulation tape to avoid outside case over-heated > 90oC at the extr cost ( $300 )
|
Continuous Temperature | 1000oC |
Max. Heating Rate | <= 10 oC /min |
Tube Size and Materials | Fused quartz tube：50mm O.D x 44mm I.D x 600mm L |
Heating Zone Length | 300mm (single zone) |
Temperature Controller
 | - 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built in PID Auto-Tune function with overheating & broken thermocouple protection.
- Over temperature protection and alarm allows for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Euro-Thermo precision controller with +/- 0.1 ºC accuracy is optional from production bar
|
| Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Flange and queching tank
 | - Standard 1/4‘’ Barbed fittings with needle valves and the mechanical vacuum gauge are installed on the left of the tube with quick clamp
- Gas outlet, KF 25 vacuum port valve and quenching tank are installed on the right of the tube.
- The quenching tank size: 100 mm ID x 80mmL, ~ 500ml capacity, which may contain water or mineral oil for quenching
|
| Furnace Tilting | - The furnace is tiltable up to 60 degrees, which allow the sample slide into the quenching tank.
|
Vacuum Level | - 10-2 torr by the mechanical pump
- 10-4 torr by the turbo pump
- Please click the link below to choose a pump
|
Gas Purification and Circulation
(Optional)
 | - EQ-RMP-1 is an automatic recirculating moisture and oxygen purification system, which can provide an environment with moisture and oxygen concentration lower than 1 ppm for MTI's furnaces and gloveboxes.
- Two-columns of Molecular sieves are Built-in in the system. One is for removing oxygen and another is for removing moisture up to < 1 PPM
- The automatic pressure control system is built in to keep the pressure at a constant level
- 6" color PLC touch panel is included which can set and display the humidity and pressure level
- Oxygen sensor and moisture sensors are included.
|
Dimensions | 1100*335*720mm（L*W*H）
 |
Net Weight | about 20 Kg (excluding mobile cart) |
Shipping Weight | 100 lbs |
Warranty | One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.) |
Laptop, software & WiFi Control (Optional) | - Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters operating range.
- Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
- Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Compliance
  | 110V version | 220V version |
- CE Certified
- UL or CSA Certification is available upon request at the extra cost
| - CE Certified
- NRTL certification (UL61010) is available upon request. at extra cost
|
Warning
Click here to learn the installation of a gas regulator | - Tube furnaces with quartz tube is designed for use under vacuum and low pressure < 0.2 bars
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Vacuum limit for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gasses should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
|
Operation Instructions and Video | 
  
|
