Features   | - Roll to Roll pressing with a compact design
- R2R device is removable for use as an independent rolling machine
- Digital real pressure display up to 4T
- Rolling Speed Adjustable (10 - 50 mm/second)
- Heavy-duty steel frame, gears, and handle
- Roller size: 150mm width x 94mm Dia (dual rollers), made of hardened steel (RC: 58 - 62) with Cr electroplated coating
- Dual micrometer for accurate thickness adjustment in the range 0 - 3 mm
|
Working Voltage | AC 220V single phase, 50Hz, 350W
You may use 500W transformer to operate at 110V |
| Rolling Gap | 0 mm ~ 1.3 mm (Customization is available at an extra cost. Max gap size 2mm) |
| Rolling Speed | 10 mm/s - 50 mm/s adjustable
Forward, stop, and backward switchable |
| Torque Capability | 850N |
| Rolling Pressure | Max 4T ( adjusting by a rolling gap and detected by the load sensors |
| Rolling Accuracy | ± 2.5 μm |
Rolling Motor
 | 200W reduced AC motor with frequency speed controller located on the back of the machine
Note: (This calendar machine can not be used in a glove box with Ar gas ) |
| Surface Hardness of Rollers | - HRC 58 - 62
- Never roll materials with hardness > 50 HRC
- Sample width max 140 mm
- Note: The benchtop rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers
|
| Digital Micrometer | - Range: 0 - 10mm
- Resolution: 0.01mm (or 0.001in)
- Unit interchangeable (mm / in)
- Zeroing
- Power supply: CR2032 3V Li-ion battery
- Operating temperature: 0 ~ 40°C
|
Roll to Roll System  | - Roll to Roll function is included
- 208 - 240 VAC, 50/60Hz, Single Phase
- 220V AC Power plug is not included (Please click here to order the plug)
- Automatic film unwinding -> winding after calendering. Please click here to view more product details
|
Overall Dimensions
| Press: 610mm (L) x 306mm (W) x 450mm (H)
R2R: please refer to the picture to the left
   |
| Net Weight | 120 kg (Press) + 50 kg (R2R) |
| Compliance | - CE Certified
- NRTL or CSA certification is available upon request at an extra cost
|
| Warranty | - One year limited with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
| Application Notes | - The MSK-2150 rollers are specially designed for battery R&D in terms of its advantages as affordable, compact, and precise. Please strictly follow the instructions to operate:
- Must use acetone to clean rollers' surface after each use
- If the machine will be idle for a long period of time, please apply anti-rust lubricant on the rollers
- The minimum thickness of the rolled sheet should depend on the physical property of the material. If you have other materials to process. Please mail us your samples and we are willing to do the test for you
- Warning: never roll materials with hardness > 50HRC
|
| Warnings | - Never roll materials with hardness > 50HRC
- Multi-step thickness calendering needed: while calendering the sample sheet, make each calendering decrement of 0.02mm comparing with sheet original thickness
- Never calendering decrement over 0.02mm comparing with original sheet thickness each calendering
- Must clean the roller surface for each rolling and use acetone to clean and lubricate when not in use to avoid corrosion
|
| Operation Video
|  |
