Furnace structure | - Double-layer steel case with two cooling fans, which ensure low surface temperature
- High purity fibrous alumina insulation for energy saving
|
Power | - 9 KW
- Require 60A Air breaker switch
|
Voltage | - AC 220-240 Single Phase, 50/60 Hz
|
Heating Zone Length | - Two zones heated separately
- Zone 1: working temperature 800 - 1500ºC (Heated by SiC ), length: 12" (300 mm), Thermocouple: S-type
- Zone 2: working temperature 800 - 1700ºC (Heated by MoSi2) heating 12" (300 mm), Thermocouple: B-type
- Constant temperature zone length: 14" (300mm) within +/-1ºC if two-zone at same temperature < 1500oC
- Max. Heating rate: 10ºC/min
|
Alumina Tube Size | GSL-1700X-II-50
50mm O.D. x 44mm I.D x 1000 mm Length | GSL-1700X-II-60
60mm O.D. x 54mm I.D x 1000 mm Length | GSL-1700X-II-80
80mm O.D. x 74mm I.D x 1000 mm Length | |
Tube and Flange | - Stainless steel vacuum sealing flange with valve and meter is included
- The thermal blocks are included. See picture below middle how to place
- You may order flange support to avoid tube rotating ( click Pic below right )
 click here to order spare  .jpg)
|
Fitting Ports
 | In order to increase the throughput and achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter, please click underline to order. For supplying high-pressure gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting, please click underline to order. |
Temperature Control
 | - PID automatic control via SCR (Silicon Controlled Rectifier) power control
- 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Built-in over-temperature alarm and protection allow for operation without the attendant.
- +/- 1 ºC temperature accuracy.
|
Heating Elements | - Zone one: 6 pcs U type SiC rods (1500C grade )
- Zone two: 6 pcs U MoSi2 rods (1800C grade )
|
| Power cable & plug | - 10 feet length 8-3 AWG heavy duty UL approved power cable is included
- Extra length cable can be ordered by click picture below
- The plug is not included. You can order from your local hardware store according to female plug in your lab, or order from the link below (50A plug)
|
Dimension | 780 L x 450 W x 720 H mm |
Net Weight | 150 kg |
Warranty | One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.) |
Laptop, software & WiFi Control(Optional)
  | - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat treatment recipes, record, and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
|
| Compliance | - CE Certified
- UL / MET / CSA Certification is available upon request, additional charges will apply
- The temperature controller is MET and CE Certified
|
Shipping Dimensions | 47" x 40" x 45" |
Shipping Weight | 480 Lbs |
Notice | How to set up ceramic tube and vacuum flange for MTI Tube furnace |
Warnings  Click here to learn more about the installation of a gas regulator. | - The tube furnaces with alumina tube are designed for use under vacuum and low pressure < 0.02 Mpa
- Never use graphite crucible inside the alumina tube.
- Vacuum pressures may only be safely used up to 1500°C. The flow rate for gasses should be limited to <200 SCCM (or 200mL/min) for reducing thermal shocks to the tube.
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.
|
| Operation Instructions |  |
