XY Stage: MultiBase

0.0/5 rating (0 votes)


Lesker XY Stage: MultiBase


The Kurt J. Lesker MultiBase stages provide modular platforms for the manipulation of components in the X & Y planes. A MultiBase may be used as a discrete stand-alone component or combined with our range of Linear Shift Mechanisms and MagiDrives to build a multi-axis manipulator with up to six axes of motion.

The MultiBase XY stage is the first choice for both research and demanding production environments due to its precise motion, true UHV performance, and rugged construction which allows mounting in any orientation.

The MultiBase design includes two parallel flanges. One remains fixed while the other provides the movement. A high quality, edge welded bellows spans the flanges to accommodate the required motion while ensuring an all-metal vacuum enclosure. The device works by adjusting the position of the traveling flange in relation to the fixed system mounting flange. Positioning of the traveling flange is controlled through two external lead-screws.

A kinematic mechanism ensures smooth and precise motion. This novel mechanism incorporates a high precision drive and guidance system, removing the requirement for vulnerable cross-roller slides used by other manufacturers. Combining this with a rigid construction allows mounting in any orientation without additional supports.

Scales are fitted to each axis for resolving the position of the traveling flange on the manual version. The motorized stages are fitted with stepper motor and gearbox combinations.


  • Up to ±31mm of X & Y Motion
  • Can be mounted in any orientation
  • Smooth kinematic motion
  • Robust construction for high loads

Movement Diagram

Unlike some X/Y manipulators where the X/Y travel is limited by the central probe and the ID of the edge welded bellows, the MultiBase limits the X and Y travel using rigid stops, which provides a more robust design. In the context of the diagram above this means that the axis of the central probe / tube cannot pass outside the limitations of the red box, as defined by ± XMAX and ± YMAX, both given in the table below. The absolute maximum displacement from the center will be the vectorial sum of ±Xmax and ±Ymax, which is given simply by Pythagoras as:

± (XMAX2 + YMAX2) 0.5 

Provided the central probe or tube has a diameter less than 'PROBE OD' (also given in the table) it will not clash or harm the bellows.

NOTE: The fixed flange is supplied with metric tapped holes as standard, clear holes are available on request.



Lesker XY Stage: MultiBase

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818