Vacuum Insulated Flex Hoses

0.0/5 rating (0 votes)

Description

Lesker Vacuum Insulated Flex Hoses

These Kurt J. Lesker flexible stainless steel hoses are vacuum insulated, conferring many advantages over normal methods of transferring LN2 from a pressurized dewar to the trap or cryogenic shroud.

Features:

  • Warm to the touch and will cause no freeze-burns
  • Conserve LN2 (see chart below)
  • Eliminate danger of frost, ice-balls, or moisture problems
  • Eliminate hazard of water puddles
  • Enable for fast delivery of LN2 to the receiver
  • Remain flexible during LN2 transfer

The hoses have all stainless steel construction with a protective outer braid or spiral wrapping. In the vacuum space, super insulation layers are applied at a density of 60 layers/inch diameter. The vacuum annulus is baked, evacuated to 10-6 Torr, and a chemical getter added. Each hose is helium leak checked to 1 x 10-9 std. cc/sec., cold shocked, and flow tested prior to shipment.

Three hose internal diameters are available-"Super Flexible" hoses in 1/4" and 3/8" and "Flexible" hose in 1/2". Any length, from 4 to 20 feet in 2-foot increments, is available. Contact us for the price of hoses in excess of those shown in the ordering table.

End connections can be plain tube, JIC Swivel (otherwise known as 1/2" flare nuts), or male NPT to suit the tube diameter. Most large LN2dewars use JIC Swivel connections at their outlets.

These highly flexible transfer hoses are used for all LN2 transfer applications, including filling smaller receptacles and supplying LN2 to moving or vibrating reservoirs. The most surprising data justifying their use is the cost of LN2 lost to evaporation when using other transfer systems.

 

 

Lesker Vacuum Insulated Flex Hoses

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818