Modular Stepper Motor Controller (MSMC Series)

0.0/5 rating (0 votes)

Description

Lesker Modular Stepper Motor Controller (MSMC Series)

 

Introduction

The Kurt J. Lesker KZMSMC integrated stepper motor controller provides a cost effective solution to a wide range of applications that require accurate manipulation of the driven mechanism. The Kurt J. Lesker KZMSMC incorporates a less sophisticated software interface to that of the KZSMC range.

  • Single and Multiple axis control
  • Complete system solution
  • Plug & run simplicity
  • Programmable positioning
  • Optional closed loop control
  • Matching size 17–34 frame motors
  • Bench or rack mounting options
  • 0.5 to 3.5 A per phase current output
  • 48 VDC

A user friendly command line interface is used to communicate to the KZMSMC via a host computer. The commands are inputted as a string of ASCII characters that can then be transferred via the RS232 or RS485 connection to the controller. A number of strings can be stored in the KZMSMC's on-board memory to form a sequence of moves that can be triggered by the available inputs.

Simply connect the intelligent drive to a PC, motor, travel limits etc, and an AC power supply using cables provided, and the system is fully operational.

Features

  • Integrated power supply for direct connection to AC supply
  • Choice of 115 or 230 Vac, 50 or 60Hz operation
  • Integrated high efficiency bi-polar drive stage 400 step/rev. (half-step mode) motor resolution provides smooth operation
  • Integrated motion controller
  • RS232 or RS485 communication
  • Up to 99 units can be daisy chained to a single port
  • Internal memory stores sequences for stand alone operation
  • Programmable position, acceleration, deceleration & velocity
  • 8 in and 8 out programmable digital I/O to interface with other process functions
  • Dedicated inputs for limits and datum references
  • Optional jog box for manual operation
  • Choice of matched size 17, 23 & 34 frame motors

 

 

 

Lesker Modular Stepper Motor Controller (MSMC Series)

 

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818