Edwards Needle Gas Valve

0.0/5 rating (0 votes)

Description

Lesker Edwards Needle Gas Valve

The Kurt J. Lesker Edwards LV10K manual fine control needle valve provides close control of a gas bleed or gas injection into a vacuum chamber. It can be mounted in a pipe-run or on a panel. A knob controls needle movement and, therefore, the gas leak rate through the valve. Resetting flow rates is aided by a pointer moving over a 100 division scale . (The scale can be rotated relative to the valve body as needed.)

The stainless steel needle is spring-seated in a replaceable brass valve seat. The constant spring pressure reduces the risk of needle damage. A fluoroelastomer 'O' ring provides the seal between the needle and the valve-body. Each valve port is fitted with sintered bronze filter to prevents particulate matter entering the valve and damaging the needle or seat.

 

 

 

Lesker Edwards Needle Gas Valve

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818