Compact Auto-Sliding Tube Furnace (50mm OD, 1200°C max.) with Flanges for Fast Heating / Cooling - OTF-1200X-50-SL

0.0/5 rating (0 votes)

Description

Item Number: OTF-1200X-50-SL

OTF-1200X-50-SL is a compact automatic sliiding tube furnace with 2"OD x 36" L quartz tube and flanges with 1200°C max. working temperature. The automatic sliding mechanisim the furnace sliding from one side to another to achieve max. heating and cooling rates > 100°C/min. For fastest heating, the furnace may be pre-heated to a desired temperature and then be slided to the sample's position. As for fastest cooling, the furnace can be slided to another side after sample heating is completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gases. This furnace provides an alternative for rapid thermal processing at the lowest cost.

SPECIFICATIONS

Furnace Structure

  • Double layer steel structure with dual air cooling fans
  • One pair of sliding rails are installed on bottom of furnace, which allows furnace to be manually moved from side to side
  • Vacuum flanges and a digital vacuum gauge are installed for immediate use.

Power

1.5 KW
Voltage AC 110V Single Phase, 50/60 Hz

Max. Temperature

1200°C (<1 hour) with flowing gas

Continuous Temperature

1100°C

Heating& Cooling Rates

Heating Rate:
15°C/sec (RT - 150°C);
10°C/sec (150°C - 250°C);
7°C/sec (250°C - 350°C);
4°C/sec (350°C - 500°C);
3°C/sec (350°C - 550°C);
2°C/sec (550°C - 650°C);
1°C/sec (650°C - 800°C);
0.5°C/sec (800°C - 1000°C);
Cooling Rate:
15°C/sec (1000 - 950°C);
10°C/sec (950°C - 900°C);
7°C/sec (900°C - 850°C);
4°C/sec (850°C - 750°C);
2°C/sec (750°C - 600°C);
1.5°C/sec (600°C - 500°C);
1°C/sec (500°C - 400°C);
0.5°C/sec (400°C - 300°C);
Note: The max heating and cooling rate is achieved by pre-heat one side of processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.

Heating Zone Length

8" (200mm), single zone. The following picture shows the temp. distribution across the heating zone, please click to enlarge.

Constant Temperature Zone

2.3" (60mm) (+/-1°C) @ 1000 °C

Heating Elements

Fe-Cr-Al Alloy doped by Mo


Processing Tube

  • High purity fused quartz tube
  • Size: OD: 2" x ID: 1.8." x Length: 39" (inch) (50 mm OD x 46mm ID x 1000 mm L

    Share this product

    Featured Products

    • 1
    • 2
    Prev Next

    MTI - Tube Furnace

    MTI - Tube Furnace

    OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

    Read more

    KDF - 900 Series (PVD)

    KDF - 900 Series (PVD)

      The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

    Read more

    Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818