F10-AR System

0.0/5 rating (0 votes)

Filmetrics F10-AR Measure Anti-Reflection Coatings and Hardcoats Easily and Affordably

Filmetrics F10-AR is the first instrument designed for simple, affordable measurement of ophthalmic anti-reflection coatings.  Available at a fraction of the cost of most instruments in use today, it contains several proprietary advances that allow line operators to make conclusive readings in seconds, and with only minutes of training. Minimum, maximum, and average reflectance can be go/no-go tested over any number of user-defined wavelength ranges.  A special algorithm allows for the correction of localized reflectance distortions caused by hardcoat layers.  Filmetrics proprietary AutoBaseline feature results in vastly increased baseline intervals and fives-times better accuracy than other fiber-probe-based reflectance instruments.  Hardcoat thickness 0.25-15um can be measured with our optional UPG-F10-AR-HC software upgrade.  Hardcoat thickness even in the presence of AR layers are no problem.

 

No Backside Preparation Necessary

Filmetrics F10-AR exclusive probe design rejects 98% of backside reflections on substrates 1.5mm thick, and rejects even more on thicker lenses.

The Filmetrics F10-AR connects to the USB port of your Windows computer and sets up in minutes.

The Filmetrics F10-AR includes everything required to make measurements.

  • Integrated Spectrometer/Light Source Unit
  • FILMeasure 5.0 software
  • CP-1-AR probe
  • BK-7 reference material
  • Hardcopy of Operator’s Manual
  • Connecting cables
  • Spare lamp
  • Special fixture for 70mm lenses
  • Flattening filter (for highly-reflective substrates)

Common Optional Accessories

  • Laptop computer pre-loaded with FILMeasure software
  • UPG-F10-AR-HC Hardcoat Thickness upgrade
  • Transmittance Upgrade
  • Carrying case

In addition, each Filmetrics F10-AR includes these Filmetrics advantages:

  • Free software updates
  • Applications Engineers available for immediate assistance (6am-6pm PT)
  • Online “Hands On” support (internet connection required)
  • Hardware upgrade program

 

 

Premier Solutions Pte Ltd / Filmetrics F10-AR System thin film measurement / thickness measurement

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818