1750C Large Bench-Top Muffle Furnace (10 x 10x 12", 19L) with Kanthal-Super-1800 heating elements - KSL-1700X-KA3

0.0/5 rating (0 votes)

Description

Item Number:KSL-1700X-KA3

KSL-1700X -KA3 is a CE certified bench-top ultra-high temperature muffle furnace with a max. working temperature up to 1750°C. The furnace uses Kanthal Super- HT (1800C grade) MoSi2 heating elements and is controlled by a high precision SCR (Silicon Controlled Rectifier) digital controller with +/-1 °C accuracy and 30 segments that are programmable up to 1750°C. It is an ideal box furnace for sintering high purity ceramic materials at high temperatures without element contamination.

SPECIFICATIONS

Furnace Structure

  • Double shell steel case with cooling fan to keep case surface cool
  • High purity alumina fiber insulation for max. energy saving
  • ZrO2 (YSZ) chamber coating for longer service life

Dimensions

  • Chamber: 250x 250x 300 mm (10 x 10 x 12 inch), 19 Liter
  • Overall: 600 x 780 x 620 mm (24 x 31 x 24.5 inch)

Power

5KW

Voltage

AC 208V-240V single phase, 50/60 Hz (50A air breaker required)

Standard Working Temperature

1720°C (continuous)

Maximum Working Temperature

1750°C (< 3 hours)

Heating Rate

  • RT ~10°C/min ( RT - 1600°C )
  • 2 ~5 °C/min (1600 ~ 1750°C )
  • Note: lower heating rate will result in longer service life of heating elements
Temperature Accuracy +/- 1° C
Temperature Uniformity
  • +/- 5°C over 120 mm (5") @ 1700°C
  • +/- 2°C over 80 mm (3") @ 1700°C
Heating Elements 8 pcs, Kanthal Super-1800 grade MoSi2 Heating Element - 360mm L,
Thermocouple B Type (Pt-Rh to Pt-Rh) with YSZ tube

Temperature Controller

  • PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
  • 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
  • Please click here to learn why SCR is more accurate than SSC (Solid state relay).
  • Built in PID Auto-Tune function with overheating & broken thermocouple broken protection.
  • Over temperature protection and alarm allows for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • RS485 Communications Port.
  • Optional:
    • The furnace may be operated by PC by installing a control module. Please order a MTS-02 control module at extra cost.
    • If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.

Power Cable & Plug
  • 10 feet length 10-3 AWG heavy duty UL approven power cable is included
  • Extra length cable can be ordered by click picture below
  • Plug is not included. You can order from your local haedware store according to female plug in your lab, or order from link below (30A plug)

Net Weight

160Kg

Shipping Weight

420lbs

Shipping Dimensions

34" x 32" x 53"

Warranty

  • One year limited warranty with life time support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
  • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
Compliance
  • Furnce: CE certified .
  • CSA certificate is available upon at extra cost
  • Components: Temperature controller and Transformer are UL or Met certified.
Application Notes
  • For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
  • Cooling rate shall also not exceed 10 °C /min.
  • This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
  • Please click here to learn how to DIY gas purging system.
  • Refractory block must be inserted before closing door.
Operation Instructions





STANDARD PACKAGE

P/N

Description

Quantity

Click pic to order extra

KSL7-01

Kanthal Super 1800 Grade Heating Element - 360mm L

8 pcs

KSL7-02

B-Type Pt-Rh to Pt-Rh Thermocouples with Alumina Protection Tube

1 set

KSL7-03

Al2O3 Sample Plate ($95.00/ea)

1 pcs

KSL7-04

Al2O3 Furnace Door Block ($265.00/ea)

1 pcs

KSL7-06

Crucible Clip ($25.00/ea)

1 pair

KSL7-07

Operation Manual

1 set

 

 

 

 

 

Premier Solutions Pte Ltd / MTI Corporation - 1750C Large Bench-Top Muffle Furnace (10 x 10x 12", 19L) with Kanthal-Super-1800 heating elements - KSL-1700X-KA3

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818