1700°C Tube Furnace with High Vacuum System (1.0E-5 torr) - GSL-1700X-HV series

0.0/5 rating (0 votes)

Description

Item Number: GSL-1700X-HV series

GSL-1700X-HV series furnace consists of a high temperature alumina tube furnace and a high vacuum system.
It can be heat up to
1700°C by different type of MoSi2 heating elements and achieve vacuum pressure up to 10^-5torr with a diaphragm pump. It is widely used for material or chemical lab to sinter all types of new material samples under vacuum or other gas conditions. The temperature of GSL1600-80X tube furnace is controlled by30 segments programmable high precision SCR power controller with accuracy +/-1°C.

Specifications
Furnace Furnace structure Double layer steel casing with air cooling. Two cooling fan inside to keep  case temperature < 55°C
Tube Materials 99.8% High purity Al2O3 Ceramic
Tube Size Please select the tube size in the option bar.
80mm O.D Alumina tube  ---------- ID: 72mm; OD: 80 mm in diameter  x 1000 mm length
100mm O.D Alumina tube --------- ID: 101.6mm x OD: 92 mm x 1000 mm length.
Refractory lining 1750 grade fiber alumina cast
Heating element 1700 grade MoSi2
Working Temperature 1700°C (2912°F) Max.  <1hr
1600°C continuously
Normal Working Temperature 800 -1700°C (2732°F)
Temperature Controller
PID automatic control via SCR (Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 51 steps programmable
Max. Heating / Cooling Rate 5°C / min above 1200°C and 10°C/min below 1200°C
Heating Zone 457 mm (18")
Constant Temperature Zone 150 mm (6")  (+/- 1°C at 1600°C  )
Temperature Accuracy +/- 1°C
Power Input Single Phase, 220V AC, 50/60 Hz
Power Output Max. 5KW
High Vacuum Station Structure Mobile cart size:  600 (L) x 600 (W) x 700(H), mm
Max. Loading:       600 Lbs on top
Molecular pump control Panel :   LCD digital
Inside:   Pfeiffer vacuum pump  made in Germany
Vacuum sensor is included
Vacuum sensor Two vacuum sensors are installed in this system.
1. Digital vacuum gauge (measuring range 0.1 mtorr ~ 850 torr) is installed in the right flange of the furnace to monitor the low vacuum status when operating the furnace without the support of the HV station.
2. High vacuum gauge (measuring range 10^-8 mbar ~ 10^3 mbar) is installed in the whole high vacuum system for monitoring the high vacuum status when operating the furnace with HV station support.
Control Panel One button operation - the diaphragm pump and the turbo molecular pump will start after pressing "start" button.
System controlled spinning speed - the controller will control the speed of the turbine spinning up and down according to the vacuum level and leaking rate of the reaction chamber.
Self protection - the system will protect the pump from damage by overheating and over-current if the leaking rate of the reaction chamber is too high to achieve high vacuum. 
LCD screen - double lines parameters checking interface make the working easier to be handled.
     
Self testing Spinning up      
Volume Flow Rate Nitrogen   N2     33 L/s
Helium      He     39 L/s   (2340L/minute)
Hydrogen H2   32 L/s
Working Range From 1000 mbar to <1E-6 mbar (under Cold Condition only; Noted: Please don't use high vacuum if the temperature is over 1500 °C)
Ultimate Pressure <1E-8 mbar (without any leaking)
Power Input 110V AC or 220V AC switchable, 50/60Hz
Power consumption Duration/Max power: 100/110Watt
Shipping Info Product Dimension Tube Furnace: 550 L x 450 W x 670 H  mm (21.7" L x 17.7" W x 26.4" H) 
Mobile bench with vacuum system: 600 x 600 x 700mm
Net  Weight Furnace: 150 kg (330 lbs)
Mobile bench with vacuum system: 50 lbs
Shipping dimension Two Cases of 47" x 45" x 45"(1200L x 1150W x 1150Hmm)
Shipping weight 450 Lb (175kg)
Warranty & Certificate One year limited warranty (Consumable parts such as processing tubes, o-rings and heating elements are not covered by the warranty, please order the replacement at related products below.) 
CE certified
Note

View product manual Quick test instruction

 

 

 

Premier Solutions Pte Ltd / MTI Corporation - 1700°C Tube Furnace with High Vacuum System (1.0E-5 torr) - GSL-1700X-HV series

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818