UL Standard 1200°C Small Box Furnace (6"x6"x7", 4.2 liter) with Programmable Controller - KSL-1200X-J-UL

0.0/5 rating (0 votes)

Description

 

SPECIFICATIONS:

Structure
 
  • High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency. 
  • Heavy duty double layer structure with cooling fan to keep furnace exteriors safe to touch. 
  • Doble layer steel case with forced air cooling to ensure lower saferface temperature.
  • One venting port is built on the top of furnace
Chamber Dimensions
  • 150mm(D) x 155mm(W) x 180mm(H),   ( 6"x6"x7")
  • Capacity: 4.2 Liter or 0.44 cubic ft
Power 2.5KW
Max. Current 15A
Voltage 208 -240V Single Phase 50/60 Hz
Note: Power cable included , but without plug. Please install a plug by your own or click link below picture to choose a plug according to your country or your lab requrirment
Operating Temp Range
  • 100-1200 °C
  • 1100 °C (Continuous)
  • 1200 °C Max  (< 4 hour)
Stability at 1000 °C +/- 0.5 °C
Uniformity at 1000 °C +/- 2.0 °C
Max. Heating Rate 30°C/ min.
Temperature Control
 

 
 
  • PID automatic control and auto-tune function.
  • 30 programmable segments for precise control.
  • Built-in over temperature alarm and protection allows for operation without attendant.
  • +/- 1 ºC temperature accuracy.
  • K type thermocouple installed for immediate use. 
  • Optional:  
    • The furnace may be operated by PC with a control module. Pls order a MTS-02 control module at extra cost.
    • If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer (laptop) from us to avoid software installation problems.
                
Net Weight 62 lbs
Shipping Weight 100 lbs
Shipping Dimension 40"x30"x36"
Overall Dimensions 
 
    360mm(L) x 300mm(W) x 510mm(H)  
Warranty
  • One year limited warranty with life time support.  
  • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
Compliance
  • CE Certified
  • All electric components ( >24V) are UL / MET / CSA certified
  • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. ( please click marks below to learn details )
                        
Operation Instructions          
              
Application Notes

 
  • For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
  • Cooling rate should not exceed 10 °C /min either.
  • This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating 
  • Heating module is easy to replace. Click pic left to order spare the Heating module for replacement
  • If firing material release vapor or smoking, please put the furnace into a hume hood as picture left 2

Share this product

Featured Products

  • 1
  • 2
Prev Next

MTI - Tube Furnace

MTI - Tube Furnace

OTF-1600X-III- is a split-able three-zone tube furnace with Kanthal 1650°C grade SiC heating element,  82mm OD Alumina tube •...

Read more

KDF - 900 Series (PVD)

KDF - 900 Series (PVD)

  The 900 Series features dual load lock, in-line, sputter down, batch systems configured with an optional high vacuum load lock and three or four target positions. •...

Read more

Copyright © 2012 - 2015 Premier Solutions Pte. Ltd. All Rights Resrved | Address: 100 Tras Street, 100 AM, #16-01, Singapore 079027. Tel: (65)62843818